Mesh Beads

Topfix channel range can be supplied for surface fixing, cast in type or as a framing system. All channels supplied for casting in are supplied with welded anchors, polystyrene infill and nailing holes. The benefits of cast in channel are that there is no installation stress on the concrete, edge distances can be reduced and no site drilling is required which offer a significant cost saving. The channel does require correct positioning by the installers. Welded anchors are generally at 250mm centres, but this may need to be reduced for higher loadings.

Stainless Steel Lathing
(2500 x 700)

For external render work to provide a material
highly resistant to corrosion.

REF:- DM/LATH

Stainless Steel Rib – lath
(2500 x 600)

Used for external rendering.

REF:- RB/LATH

Stainless Steel Angle Bead
(3.0m)

For external render work. One size for all thicknesses.

REF:- AB

Stainless Steel Stop Bead
(3.0m)

Finishes render edges if four depths
REF SIZE
SB10 10mm
SB13 13mm
SB16 16mm
SB19 19mm

Stainless Steel Render
Stop (3.0m)

Forms and protects lower ‘bell cast’ edge of render
REF:- RS

Stainless Steel Movement
Bead (3.0m)

Forms movement joints in render
REF:- MB