TOPFIX support systems

Designed to suit site conditions. The range is therefore best specified by using three main variables to calculate your system requirements. Cavity Width, Height of Brickwork and the backing structure Concrete or Steel.

TOPFIX TFS System

One of the most versatile support system available. This system consists of continuous angle with welded support brackets. The support brackets can be standard, inverted, extended and welded at the required centres.

Type	Cavity	Height of Brickwork	Concrete or Steel
TFS/50/3.0/C	50mm	3000mm	Concrete
TFS/50/4.5/S	50mm	4500mm	Steel
TFS/75/3.0/S	75mm	3000mm	Steel
TFS/75/5.0/C	75mm	5000mm	Concrete
TFS/100/4.5/C	100mm	4500mm	Concrete
TFS/100/5.0/S	100mm	6000mm	Steel
TFS/100/6.0/S	100mm	6000mm	Steel

TOPFIX TCA System

A continuous angle support system. This system is mainly used for cavities below 50mm. Angles can be manufactured from 3mm to 15mm thick in 3000mm lengths. Angles would be supplied with pre-punched holes, slots and welded serrated patches all depending
on the contract requirements.

TYPICAL SPECIFYING CODES FOR TCA

Type	Cavity	Height of Brickwork	Fixing Type
TCA/50/3.0/C	50mm	3000mm	Concrete
TCA/75/4.0/S	75mm	4000mm	Steel
TCA/100/5.0/S	100mm	5000mm	Steel
TCA/100/6.0/C	100mm	6000mm	Concrete
TCA/110/7.5/C	100mm	7500mm	Concrete

Conditions of Sale